Rich blues, ripe olives, bright greens that have a sense of calming simplicity. These colors are considered neutrals by nature. These colors bring the sense of nature with it’s natural hues of blues and greens inside your space. This is a trend that will be here to stay for a long time. People are adding life back into their spaces and beautiful natural colors. If you are thinking about grey walls I would think again.


From wall paint to furnishings, it’s best to avoid dark colors and contrasting hues in a small space. “Stay with light colors—a monochromatic color scheme is best—so you don’t feel like you’re in a cave,” Maykut advises. Soft gray walls, for example, are very popular right now. If you’d prefer a bit more color, consider other trendy options, such as icy blue, seafoam green, warm white, and butter yellow. All of these colors work well, paired with white trim and cabinetry, for opening up a tiny bathroom. You’re sure to find some appealing options in light-colored cabinetry among the selection of more than eight colors that Sears Home Services offers.
Here’s how to get started painting you kitchen cabinets. Paint the back first, leaving the edges unpainted so you’ll have a spot to put your fingers when you turn the door over. Paint the back. Then flip the door over and rest it on the screw tips. Now you can paint the door edges and front, then let the door dry. If you look hard, you can spot tiny indentations where the screws contact the wet paint, but they’re inconspicuous.
This planning would be very helpful and go a long way toward keeping with your bathroom renovation plan as you move along with the project. Once you start with the renovation, you have to know that the process could take around 30-90 days. No matter how long it is going to take, try to resist the temptation of changing your plans unless financial constraints or problems arise. Change of plans will force you to spend more and for the completion date to extend further out.
You may not have a wad of cash or a lot of home-improvement know-how, but you have other resources that can help get your decorating project off the ground: the people you know. Call on a group of relatives, friends and neighbors who can supply the muscle to rip down wall paneling, roll on paint or assemble a room of flat-packed furniture. Just don’t forget to feed them lunch.

Before you even call a remodeling company for your bathroom remodel, you should first talk with everyone who will be using the space. Try to have a discussion about the fixtures and finishes you are supposed to use and how much of a budget you’re willing to shell out. As you plan for your budget, it’s important to have a little extra, because you never know if there will be some unexpected problems that will increase the cost later on.

There are certain regulations that must be followed for proper ventilation in your bathroom. Not only is it code, but it is also better for your health. Without proper ventilation, things like aerosol sprays will be left to stagnate the air. Over time, this would make it more and more uncomfortable to use the bathroom. Most bathrooms remodeling requires some form of ventilation, either through a centralized system or through the installation of the window.  Shower doors, panels, and screens need to leave ample space for ventilation. The steam that builds up during a hot shower an permeate the air to the point where it becomes difficult to breathe. During a shower, you need someplace for the steam to escape, and ventilation helps circulate fresh air into the room.  Besides, there should always be enough space for clearance during an emergency. In some cases, custom shower solutions offer you the ability to have a glass transom that can be tilted open to release steam and other particles in the air. Adding a fan to the bathroom boosts your bathroom’s ventilation capabilities. If you already have a fan installed, you may want to add a second one depending on the size specifications of your bathroom.
Don't bother taping windows when painting sashes—it takes a long time and paint usually ends up on the glass anyway. Go ahead and let paint get on the glass. Once it's dry, simply scrape it off with a razor blade. The paint peels off in seconds. "Just be careful to not break the paint bond between the wood and the glass," a pro cautions. "Otherwise, moisture can get on the wood and cause rot."
Choosing the right layout for your powder room is important, not just for you but for your guests. This is the bathroom that your friends and neighbors will use most often in your home, rather than traveling to the private bathroom next to your bedroom.Powder rooms got their name from the 18th century, and are still largely used for the same purpose: as a space for guests to freshen up. Nowadays, powder rooms typically include a toilet and a sink, but never a tub or a shower. If you are looking to build a custom powder room from scratch, you should make space near your entryway or off of one of the more public rooms in your home.Typical powder rooms are about 20 square feet in size, and can be an easy extension to a living room or hallway. Pedestal sinks are a great way to save space when your powder room is on the smaller side, leaving plenty of legroom for guests. There are certain measurements and specifications that must be utilized in accordance with the IRC. The toilet and sink must always be accessible. But in most cases, this is easy to accomplish for your bathroom remodeling.
The first impression of your house is your door. If you are unable to change the door completely and if your existing door is in a good condition then you should repaint your door. Your doors could also affect the lighting of your room, and you could benefit from this great technique interior designed Amy Lau uses, “When dealing with a dark room, whatever color is used on the walls, I paint the ceiling, trim, and doors the same color but 50 percent lighter. Too much of one shade can overpower a space.” So, when renovating on a budget if you are repainting your door try to use different shades according to the concentration of light in your house to optimize the lighting of your house the way you want to.

Design can be overwhelming. People often want to know where exactly to start. For any room, I usually suggest that you begin from the ground up: Decide on the floor covering. It doesn’t matter if you want or have hardwood floors, area rugs, tile, stone or wall-to-wall carpeting. Thinking about your floor first will dictate how other pieces are layered in the space. If you select a neutral tone or natural fiber without a lot of pattern or color, you have more options with colors or upholstery. If you start with an antique rug, you can draw colors from the rug to formulate a color palette. It is important to plan these things in tandem, otherwise you end up with the circus effect: too many things going on without the space as a whole functioning in unison. Starting with a sofa or upholstered chairs limits your style immediately. There is more flexibility with something like an area rug with dozens or even hundreds of possibilities. This is where you have options and can then start to layer pieces. It is a much easier approach to make your final floor covering decision first, and then layer.
Don't cheap out on paint and brushes. Cheap brushes are false economy. Buy a Wooster or something with some heft. That $3 plastic brush is going make it look like you smeared paint on the wall with a rake. And the bristles fall out. I like a nice 2-1/2-inch angled brush. It's versatile and you can wash and reuse it until the bristles wear down to a nub. And get the most expensive paint, too. Why? Because it will go on easy and offer the best coverage. It'll last a long time. You'll be able to wash a grubby fingerprint off the wall without taking the paint with it. And your whole job will just go quicker and easier.
×